Model 1400 Hydrojet Self-Contained C.I.P. System
D C Norris & Co. (Engineering) Ltd have long since recognised the need for a self-contained C.I.P. system for vessels and equipment without the expense of make-up tanks, valves, pumps, etc. and, as a result, have developed the exciting new HYDROJET CLEANER.
Installed in a central position at the wall, permanently connected to the supplies, the unit is always ready for use thanks to the new stop/start system.
Robust and reliably constructed, moreover, virtually maintenance free.
All parts are assembled in a hygienic stainless steel cabinet, well protected against dirt and damp.
The system can be manually controlled or programmed to give a fully automatic cleaning cycle with variable parameters.
Tamper-proof locking facility.
A typical program would give:
PRE-RINSE
FULL HOT WASH WITH DETERGENT
RINSE
SANITIZE
FINAL RINSE
A quick release pipe connection to change to an optional hand gun, available if required.
| Service Connections: |
Steam |
— |
80-100psi |
— |
1" BSP |
Water |
— |
30psi |
— |
1" BSP |
Electric |
— |
240v |
— |
1 phase 5A |
Air |
— |
80psi 1cfm |
— |
1/4" BSP |
Drain |
— |
— |
— |
3/4" BSP |
Indicator lamps display sequence of operation.
Comes complete with 3.5 metres of pressure hose and high velocity sprayball.
Dimensions/Weight:
640mm wide, 300mm deep
1330mm overall height
Aprroximate shipping weight 75kgs |
