  Marmitas - Joni Kettles |
|
Multi-Mix
A New Generation of High Tilting Cooking Kettles
The MultiMix kettle is a high tilting kettle with a sturdy mixer integrated in the kettle bottom. Besides being a top performance cooking kettle, the MultiMix kettle will also mix, whip or mash the content in the kettle. These cooking processes previously requiring various machines may now be achieved with the same machine, allowing the cooking process to be more effective. The MultiMix kettle is as standard equipped with electronic heat, mixer and water filling control and an ergonomically correct lid with gas spring. The mixer has six pre-programmed mixing patterns where speed and mixing time are continuously variable. Due to personal safety the mixer will automatically decrease the speed to a safe level when the lid is open. Due to that it is possible to add ingredients and to check the food being cooked while the mixer is rotating slowly, it is also possible to use the mixer while emptying the kettle to ensure a more equal distribution of the content. |
|
|
 |
Electronic control of the kettle and mixer |
Lightweight mixer tool with detachable scrapers |
Powerful and effective bottom mixer |
Vast application potential |
Kettle body manufactured in strong stainless steel without crevices and joints |
High heating power for fast heating |
Ergonomically designed lid |
Sturdy reliable long life construction |
Very easy to operate |
Hygienic and easy to clean |
Labour saving |
Net volume from 40 to 400 litres |
|
Programmable water flowmeter
|
Control unit type AutoTemp with extended fuctions:
Automatic warm keeping at optional temperature
Quick selection of three pre-programmable temperatures
Automatic start and stop of the cooking process
Timer for the cooking time
|
| Impact-proof spray gun, ergonomic design with adjustable spray patterns |
| Sieve plates |
| Big inspection opening in the lid |
| Volume measuring stick |
|
|
Marmitas. DCN Steam Jacketed Kettle -
Inclined Agitator |
|
D C Norris direct steam jacketed kettles are designed for the cooking and/or mixing of a wide range of food products, including soups, stews, sauces and preserves.
D C Norris kettles can be integrated into existing processes by utilising the range of outlet options that can be fitted to the standard outlet in the base of the kettle. These include manual or automatic ball valves and EHEDG certified, air operated drop down valves.
 |
Inclined scraping type agitator which has patented scoop-type scraper shovels with replaceable, heat resistant, food approved, plastic blades
Standard sizes range from 300 to 1500 litres. Custom sizes made to order. Supported on three or four legs (depending on size).
Steam jacket operates up to 10 bar - supplied from two steam connections on either side of the kettle to provide even heat distribution.
Kettles manufactured in stainless steel grade 316 for all food contact parts and type 304 for all other parts and designed and tested to PD5500 standards.
Insulated and stainless steel sheathed.
Standard internal sanitary finish of 180 grit. External surfaces have a semi-deluxe buff finish (or to customers specification).
Other accessories include: CIP, steam injectors, homogenisers, mixers, blenders, full controls, valve packages, gantries, etc. |
|
Kettle
|
Overall Kettle |
Kettle Height |
Kettle Leg |
Kettle Diameter |
Motor Cover |
Height DIM 'A' (mm) |
DIM 'B' (mm) |
Height DIM 'C' (mm) |
DIM 'D' (mm) |
Distance 'E' (mm) |
KF300-IA1 |
2478 |
940 |
1010 |
900 |
505 |
KF500-IA1 |
2478 |
1085 |
865 |
1020 |
505 |
KF750-IA1 |
2478 |
1176.5 |
773.5 |
1220 |
505 |
KF1000-IA1 |
2478 |
1340.5 |
609.5 |
1330 |
505 |
KF1500-IA1 |
2678 |
1525 |
625 |
1436 |
505 |
|
|
Marmitas. DCN Steam Jacketed Kettle -
Inclined Tilt - Out Agitator |
|
D C Norris direct steam jacketed kettles are designed for the cooking and/or mixing of a wide range of food products, including soups, stews, sauces and preserves. D C Norris kettles can be integrated into existing processes by utilising the range of outlet options that can be fitted to the standard outlet in the base of the kettle. These include manual or automatic ball valves and EHEDG certified, air operated drop down valves. |
|
Inclined scraping type agitator with tilt-out option which has patented scoop-type scraper shovels with replaceable, heat resistant, food approved, plastic blades.
Standard sizes range from 300 to 1500 litres. Custom sizes made to order. Supported on three or four legs (depending on size).
Steam jacket operates up to 10 bar - supplied from two steam connections on either side of the kettle to provide even heat distribution.
Kettles manufactured in stainless steel grade 316 for all food contact parts and type 304 for all other parts and designed and tested to PD5500 standards.
Insulated and stainless steel sheathed.
Standard internal sanitary finish of 180 grit. External surfaces have a semi-deluxe buff finish (or to customers specification).
Other accessories include: CIP, steam injectors, homogenisers, mixers, blenders, full controls, valve packages, gantries, etc.
Optional Top Mounted Integrated Homogeniser available. |
Kettle |
Overall Kettle |
Kettle Height |
Kettle Leg |
Kettle Diameter |
Motor Cover |
|
Height DIM 'A' (mm) |
DIM 'B' (mm) |
Height DIM 'C' (mm) |
DIM 'D' (mm) |
Distance 'E' (mm) |
KF300-IT1 |
2536.5 |
940 |
1010 |
900 |
537.5 |
KF500-IT1 |
2536.5 |
1085 |
865 |
1020 |
537.5 |
KF750-IT1 |
2536.5 |
1176.5 |
773.5 |
1220 |
537.5 |
KF1000-IT1 |
2536.5 |
1340.5 |
609.5 |
1330 |
537.5 |
KF1500-IT1 |
2736.5 |
1525 |
625 |
1436 |
537.5 |
|
|
Marmitas. DCN Steam Jacketed Kettle -
Inclined Tilt- Non Agitator |
|
D C Norris direct steam jacketed kettles are designed for the cooking and/or mixing of a wide range of food products, including soups, stews, sauces and preserves.
D C Norris kettles can be integrated into existing processes by utilising the range of outlet options that can be fitted to the standard outlet in the base of the kettle. These include manual or automatic ball valves and EHEDG certified, air operated drop down valves.
 |
Standard sizes from 300 to 1500 litres.
Custom sizes made to order.
Steam jacket operates up to 10 bar - supplied from two steam connections on either side of the kettle to provide even heat distribution.
Kettles manufactured in stainless steel grade 316 for all food contact parts and type 304 for all other parts and designed and tested to PD5500 standards.
Insulated and stainless steel sheathed.
Standard internal sanitary finish of 180 grit.
External surfaces have a semi-deluxe finish (or to customers specification).
Kettle supported on three or four tubular legs (depending on size).
Other accessories available include: CIP, steam injector, homogenisers, mixers, blenders, full controls, valve packages, gantries, etc. |
|
| Kettle Code
|
Inner Bowl I/D |
Outer Ring Dia |
Kettle Height |
Condensate Outlet |
Steam Inlet |
kettle feet PCD |
Connection Sizes |
DIM 'A' (mm) |
DIM 'B' (mm) |
DIM 'C' (mm) |
PCD DIM 'D' (mm) |
PCD DIM 'E' (mm) |
DIM 'F' (mm) |
(inches) |
K0300 (litres) |
800 |
908 |
995.5 |
250 |
578 |
780 |
1 BSP |
K0500 (litres) |
928 |
1036 |
1116 |
250 |
654 |
876 |
1 BSP |
K0750 (litres) |
1110 |
1218 |
1204 |
250 |
774 |
1010 |
1 1/2 BSP |
K1000 (litres) |
1220 |
1328 |
1397 |
250 |
884 |
1100 |
11/2 BSP |
K1500 (litres) |
1326 |
1434 |
1584 |
250 |
906 |
1182 |
1 1/2 BSP |
|
|
|
|
